How to fit a Towing Mirror

Fitting Instructions: mirror can be rotated 9 degrees to fit on alternative side of your vehicle.

1. ensure straps are located in slots of fixing brackets
2. locate protection buffers onto pips of pinch screws
3. when in position, push down firmly on each screw
4. loop lanyard over existing mirror
5. locate mouth o brackets onto rim of existing mirror
6. once in position, tighten the pinch screws firmly
7. pull straps around rear of mirror and locate clip
8. clip strap clips to underside of mirror
9. straps may be adjusted to desired length
10. adjust to desired position then tighten thumb screws
11. rear ball joint allows for exact position at any angle
12. to rotate mirror remove screw from rear ball joint
13. twist extension bar 180 and re-fit screw