Product FAQ - Weight Distribution Hitch Installation Instructions

What is a weight distribution hitch used for?

Ever experienced unnerving trailer sway, reduced steering and braking responsiveness, less traction or misaligned head lamps? This is often caused because the weight of the trailer causes increased weight on the rear wheels of the towing vehicle thereby creating an imbalance between all wheels.

Overtime this also causes a reduction in fuel economy and uneven tyre wear.

When using a Weight Distribution Hitch the load is evenly distributed through the vehicle's chassis to all four wheels.

Will the weight distribution hitch fit a 6-inch drawbar?

The weight distribution hitches that we sell will fit standard 6-inch drawbars.

What is the length of the Spring Bars?

The weight distribution hitch comes with 30-inch bars with round profiles for extra clearance along the drawbar.

How do I know which size to buy?

You need to know the ball weight of your vehicle. Bigger is not always better. You should buy the weight distribution hitch suited to the ball weight of your vehicle.

What tow bar receivers do they suit?

· Suit standard 50 mm tow bar receivers

Will the included shank be suitable for my RV?

The included standard shank will be suitable for most but not all RV set ups. New style offset shanks (not included) can be used if the included shank doesn't have sufficient range.

How do I set up my hitch?

This video has some great tips - Weight Distribution Hitch Video

As a general guide you can refer to this Instruction Manual– but when installing your unit please refer to the manufacturers own instruction manual for correct instructions.

https://www.campsmart.net.au/?rf=kw&kw=weight+distribution+hitch